As the global demand for high-frequency PCBs increases in 2025, Rogers 3006 stands out as one of the top laminate materials for RF, microwave, and millimeter-wave applications. With its stable dielectric constant of 6.15, low loss, and thermal reliability, it’s ideal for designs where signal integrity is non-negotiable.
But how much do Rogers 3006 PCBs really cost in 2025? This guide breaks down everything you need to know—from material properties to application-specific pricing—to help engineers and buyers make informed decisions.
1. What Is Rogers 3006?
Rogers 3006 is a ceramic-filled PTFE composite laminate designed for high-frequency performance. It’s widely used in RF and microwave PCB fabrication thanks to the following:
- Dielectric constant (Dk): 6.15 ± 0.15 at 10 GHz
- Dissipation factor: 0.002 at 10 GHz
- Excellent dimensional stability and thermal reliability
Typical applications include radar, satellite communication systems, automotive ADAS, power amplifiers, and antennas.
2. Average Price Range of Rogers 3006 PCBs in 2025
Estimated pricing in 2025 depends heavily on board size, copper weight, layer count, and region. Below are typical average prices:
| Type | Board Size | Estimated Unit Price |
| 1-layer Rogers 3006 PCB | 100mm x 100mm | $18 – $28 |
| 2-layer Rogers 3006 PCB | 100mm x 100mm | $28 – $45 |
| 4-layer RF PCB (standard design) | 100mm x 100mm | $55 – $90 |
| 6-layer complex RF module | 100mm x 100mm | $95 – $150 |
Price per square inch can range from $0.80 to $3.00, depending on material thickness, copper weight, and via technology.
3. Main Factors That Affect the Cost
The price of Rogers 3006 PCBs is influenced by several technical factors:
- Material Thickness: Options range from 10 mil to 60 mil. Thicker laminates can increase cost by 20–30%.
- Copper Weight: 2 oz copper adds $5–$10/board compared to standard 1 oz.
- Surface Finish:
- ENIG: +$0.25–$0.50/in²
- Immersion Silver: +$0.10–$0.20/in²
- Via Structures: Blind/buried/microvias can add $15–$50 per board.
- Impedance Control: Tight ±5% tolerance may increase costs by $3–$8/board.
4. Rogers 3006 vs Other High-Frequency Materials
| Material | Dielectric Constant | Price (4-layer, 100x100mm) | Comment |
| Rogers 3006 | 6.15 | $55 – $90 | Stable, mid-high performance |
| Rogers 4350B | 3.66 | $35 – $60 | Common, cost-effective |
| Rogers 4003C | 3.55 | $28 – $45 | Good for low-loss, lower Dk |
| PTFE (Generic) | ~2.2 – 3.5 | $70 – $120 | Very low loss, expensive |
Insight: Rogers 3006 is ideal for applications requiring a high Dk with thermal stability and consistent RF performance, offering better value than generic PTFE.
5. Prototype vs. Mass Production Pricing
Rogers 3006 PCB pricing drops significantly with higher quantities:
| Quantity | 4-layer 100x100mm | Price per Unit (2025) |
| 1–5 pcs (prototype) | $60 – $95 | Includes setup fees |
| 10–50 pcs | $42 – $70 | Includes setup fees |
| 100+ pcs | $28 – $45 | Mass production discount |
| 500+ pcs | $22 – $36 | Highly optimized production |
Note: Tooling/setup fees range from $80 to $200, often waived in larger orders.
In prototype orders, you pay more per board due to one-time setup, material handling, and custom tooling.
6. Regional Price Differences: China vs USA vs Europe
| Region | 4-layer 100x100mm Board Price | Lead Time | Notes |
| China | $45 – $70 | 6–10 days | Cost-effective, quick turnaround |
| USA | $70 – $110 | 5–7 days | Higher labor/material costs |
| Europe | $80 – $130 | 7–12 days | Tight quality/traceability controls |
If you’re sourcing internationally, be aware of:
- Shipping costs: $30–$100 depending on weight
- Import taxes: 5–12% based on country
7. Tips to Reduce Your Rogers 3006 PCB Cost
Here are proven ways to reduce costs without compromising performance:
- Panel Optimization: Use standard panel sizes to reduce waste and tooling time
- Avoid Unnecessary Vias: Design with standard through-hole vias when possible
- Hybrid Stackups: Combine Rogers 3006 on signal layers with FR4 on inner layers—can save 15–25% per board
- Simplify Impedance Requirements: Only apply tight impedance to RF traces
- Order in Batches: If you need 20–50 pcs, price breaks can reduce costs by 30–40%
Example: A 4-layer hybrid stackup with 2 outer layers of Rogers 3006 and FR4 inner core can reduce total board cost from $90 to $65 per unit.
8. Where to Source Rogers 3006 PCBs in 2025
Choosing the right vendor is critical. Look for suppliers who:
- Have in-house Rogers 3006 stock
- Offer DFM support for RF layouts
- Provide RF testing and impedance validation
- Can handle both low and high-volume orders
Top Vendors in 2025:
- KingSunPCB (China): Specialized in high-frequency RF PCBs, affordable pricing
- Sierra Circuits (USA): Ideal for quick-turn, military-grade RF boards
- Eurocircuits (Europe): REACH/RoHS certified, good for prototyping
Pricing Example (KingSunPCB, 4-layer, 100x100mm):
- 10 pcs: $48/pc
- 100 pcs: $32/pc
- 500 pcs: $24/pc
9. KingSunPCB: Affordable Rogers 3006 PCB Manufacturing
KingSunPCB is a professional PCB manufacturer with over 15 years of experience in high-frequency PCB fabrication, offering turnkey support for Rogers materials like 3006, 4350B, and 5880.
Our Services Include:
- Custom stackups and hybrid builds
- Free engineering file check
- Fast production (7–10 days)
- International logistics
Sample Pricing (2025):
- 2-layer Rogers 3006 (100mm x 100mm): $38 – $45 per board
- 4-layer board with ENIG: $58 – $75 per board
- 6-layer, complex design: $95 – $135 per board
Contact us to get a fast, free quote with real-time feedback on your RF design.
10. Rogers 3006 PCB Pricing by Application
To help engineers plan budgets more precisely, here are 2025 pricing estimates for Rogers 3006 PCBs by use case:
| Application | Design Specs | Estimated Unit Price (4-layer) |
| Automotive Radar (77 GHz) | 0.8mm, ENIG, tight impedance | $70 – $95 |
| Power Amplifier Module | 1.6mm, 2 oz copper | $55 – $85 |
| 5G mmWave Antenna Array | 1.0mm, low loss stackup | $65 – $110 |
| Satellite Communication Front-End | 1.2mm, filled vias, hybrid FR4 | $90 – $130 |
| RF Filter Prototypes | 0.6mm, Imm. Silver, 2-layer | $28 – $45 |
The more stringent the RF performance (e.g., millimeter-wave, thermal cycling), the higher the cost due to precision processing and inspection.
Conclusion
Rogers 3006 remains a strong choice for demanding RF/microwave PCB applications in 2025. While the price is higher than FR4 or basic laminates, its performance justifies the cost in critical signal paths.
Understanding the factors that influence pricing, planning for volume discounts, and working with a specialized manufacturer like KingSunPCB can help reduce cost while maintaining performance.
FAQ
Q1: Can Rogers 3006 be used in hybrid stackups?
Yes, especially with FR4 for internal layers—cost-effective and widely supported.
Q2: What’s the lead time for Rogers 3006 PCBs?
Standard: 7–10 working days. Expedited: as fast as 4 days with surcharge.
Q3: Does Rogers 3006 meet RoHS and environmental standards?
Yes, it is RoHS-compliant and suitable for global markets.